Questions — AQA (3548 questions)

Browse by module
All questions AEA AS Paper 1 AS Paper 2 AS Pure C1 C12 C2 C3 C34 C4 CP AS CP1 CP2 D1 D2 F1 F2 F3 FD1 FD1 AS FD2 FD2 AS FM1 FM1 AS FM2 FM2 AS FP1 FP1 AS FP2 FP2 AS FP3 FS1 FS1 AS FS2 FS2 AS Further AS Paper 1 Further AS Paper 2 Discrete Further AS Paper 2 Mechanics Further AS Paper 2 Statistics Further Additional Pure Further Additional Pure AS Further Discrete Further Discrete AS Further Extra Pure Further Mechanics Further Mechanics A AS Further Mechanics AS Further Mechanics B AS Further Mechanics Major Further Mechanics Minor Further Numerical Methods Further Paper 1 Further Paper 2 Further Paper 3 Further Paper 3 Discrete Further Paper 3 Mechanics Further Paper 3 Statistics Further Paper 4 Further Pure Core Further Pure Core 1 Further Pure Core 2 Further Pure Core AS Further Pure with Technology Further Statistics Further Statistics A AS Further Statistics AS Further Statistics B AS Further Statistics Major Further Statistics Minor Further Unit 1 Further Unit 2 Further Unit 3 Further Unit 4 Further Unit 5 Further Unit 6 H240/01 H240/02 H240/03 M1 M2 M3 M4 M5 Mechanics 1 P1 P2 P3 P4 PMT Mocks PURE Paper 1 Paper 2 Paper 3 Pure 1 S1 S2 S3 S4 Stats 1 Unit 1 Unit 2 Unit 3 Unit 4
Browse by board
AQA AS Paper 1 AS Paper 2 C1 C2 C3 C4 D1 D2 FP1 FP2 FP3 Further AS Paper 1 Further AS Paper 2 Discrete Further AS Paper 2 Mechanics Further AS Paper 2 Statistics Further Paper 1 Further Paper 2 Further Paper 3 Discrete Further Paper 3 Mechanics Further Paper 3 Statistics M1 M2 M3 Paper 1 Paper 2 Paper 3 S1 S2 S3 CAIE FP1 FP2 Further Paper 1 Further Paper 2 Further Paper 3 Further Paper 4 M1 M2 P1 P2 P3 S1 S2 Edexcel AEA AS Paper 1 AS Paper 2 C1 C12 C2 C3 C34 C4 CP AS CP1 CP2 D1 D2 F1 F2 F3 FD1 FD1 AS FD2 FD2 AS FM1 FM1 AS FM2 FM2 AS FP1 FP1 AS FP2 FP2 AS FP3 FS1 FS1 AS FS2 FS2 AS M1 M2 M3 M4 M5 P1 P2 P3 P4 PMT Mocks Paper 1 Paper 2 Paper 3 S1 S2 S3 S4 OCR AS Pure C1 C2 C3 C4 D1 D2 FD1 AS FM1 AS FP1 FP1 AS FP2 FP3 FS1 AS Further Additional Pure Further Additional Pure AS Further Discrete Further Discrete AS Further Mechanics Further Mechanics AS Further Pure Core 1 Further Pure Core 2 Further Pure Core AS Further Statistics Further Statistics AS H240/01 H240/02 H240/03 M1 M2 M3 M4 Mechanics 1 PURE Pure 1 S1 S2 S3 S4 Stats 1 OCR MEI AS Paper 1 AS Paper 2 C1 C2 C3 C4 D1 D2 FP1 FP2 FP3 Further Extra Pure Further Mechanics A AS Further Mechanics B AS Further Mechanics Major Further Mechanics Minor Further Numerical Methods Further Pure Core Further Pure Core AS Further Pure with Technology Further Statistics A AS Further Statistics B AS Further Statistics Major Further Statistics Minor M1 M2 M3 M4 Paper 1 Paper 2 Paper 3 S1 S2 S3 S4 WJEC Further Unit 1 Further Unit 2 Further Unit 3 Further Unit 4 Further Unit 5 Further Unit 6 Unit 1 Unit 2 Unit 3 Unit 4
Sort by: Default | Easiest first | Hardest first
AQA M2 2008 June Q1
8 marks Easy -1.2
1 A particle moves in a straight line and at time \(t\) seconds has velocity \(v \mathrm {~m} \mathrm {~s} ^ { - 1 }\), where $$v = 6 t ^ { 2 } + 4 t - 7 , \quad t \geqslant 0$$
  1. Find an expression for the acceleration of the particle at time \(t\).
  2. The mass of the particle is 3 kg . Find the resultant force on the particle when \(t = 4\).
  3. When \(t = 0\), the displacement of the particle from the origin is 5 metres. Find an expression for the displacement of the particle from the origin at time \(t\).
AQA M2 2008 June Q2
7 marks Moderate -0.8
2 A uniform plank, of length 6 metres, has mass 40 kg . The plank is held in equilibrium in a horizontal position by two vertical ropes attached to the plank at \(A\) and \(B\), as shown in the diagram. \includegraphics[max width=\textwidth, alt={}, center]{03994596-21ad-4201-8d64-ba2d7b7e0a77-2_323_1162_1464_440}
  1. Draw a diagram to show the forces acting on the plank.
  2. Show that the tension in the rope attached to the plank at \(B\) is \(21 g \mathrm {~N}\).
  3. Find the tension in the rope that is attached to the plank at \(A\).
  4. State where in your solution you have used the fact that the plank is uniform.
AQA M2 2008 June Q3
4 marks Easy -1.2
3 Three particles are attached to a light rectangular lamina \(O A B C\), which is fixed in a horizontal plane. Take \(O A\) and \(O C\) as the \(x\) - and \(y\)-axes, as shown. Particle \(P\) has mass 1 kg and is attached at the point \(( 25,10 )\).
Particle \(Q\) has mass 4 kg and is attached at the point ( 12,7 ).
Particle \(R\) has mass 5 kg and is attached at the point \(( 4,18 )\). \includegraphics[max width=\textwidth, alt={}, center]{03994596-21ad-4201-8d64-ba2d7b7e0a77-3_782_1033_703_482} Find the coordinates of the centre of mass of the three particles.
AQA M2 2008 June Q4
11 marks Moderate -0.3
4 A van, of mass 1500 kg , has a maximum speed of \(50 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) on a straight horizontal road. When the van travels at a speed of \(v \mathrm {~m} \mathrm {~s} ^ { - 1 }\), it experiences a resistance force of magnitude \(40 v\) newtons.
  1. Show that the maximum power of the van is 100000 watts.
  2. The van is travelling along a straight horizontal road. Find the maximum possible acceleration of the van when its speed is \(25 \mathrm {~m} \mathrm {~s} ^ { - 1 }\).
  3. The van starts to climb a hill which is inclined at \(6 ^ { \circ }\) to the horizontal. Find the maximum possible constant speed of the van as it travels in a straight line up the hill.
    (6 marks)
AQA M2 2008 June Q5
12 marks Moderate -0.3
5 A particle moves on a horizontal plane in which the unit vectors \(\mathbf { i }\) and \(\mathbf { j }\) are directed east and north respectively. At time \(t\) seconds, the particle's position vector, \(\mathbf { r }\) metres, is given by $$\mathbf { r } = 8 \left( \cos \frac { 1 } { 4 } t \right) \mathbf { i } - 8 \left( \sin \frac { 1 } { 4 } t \right) \mathbf { j }$$
  1. Find an expression for the velocity of the particle at time \(t\).
  2. Show that the speed of the particle is a constant.
  3. Prove that the particle is moving in a circle.
  4. Find the angular speed of the particle.
  5. Find an expression for the acceleration of the particle at time \(t\).
  6. State the magnitude of the acceleration of the particle.
AQA M2 2008 June Q6
8 marks Moderate -0.5
6 A car, of mass \(m\), is moving along a straight smooth horizontal road. At time \(t\), the car has speed \(v\). As the car moves, it experiences a resistance force of magnitude \(0.05 m v\). No other horizontal force acts on the car.
  1. Show that $$\frac { \mathrm { d } v } { \mathrm {~d} t } = - 0.05 v$$
  2. When \(t = 0\), the speed of the car is \(20 \mathrm {~m} \mathrm {~s} ^ { - 1 }\). Show that \(v = 20 \mathrm { e } ^ { - 0.05 t }\).
  3. Find the time taken for the speed of the car to reduce to \(10 \mathrm {~ms} ^ { - 1 }\).
AQA M2 2008 June Q7
9 marks Standard +0.3
7 A small bead, of mass \(m\), is suspended from a fixed point \(O\) by a light inextensible string, of length \(a\). The bead is then set into circular motion with the string taut at \(B\), where \(B\) is vertically below \(O\), with a horizontal speed \(u\). \includegraphics[max width=\textwidth, alt={}, center]{03994596-21ad-4201-8d64-ba2d7b7e0a77-5_451_458_461_760}
  1. Given that the string does not become slack, show that the least value of \(u\) required for the bead to make complete revolutions about \(O\) is \(\sqrt { 5 a g }\).
  2. In the case where \(u = \sqrt { 5 a g }\), find, in terms of \(g\) and \(m\), the tension in the string when the bead is at the point \(C\), which is at the same horizontal level as \(O\), as shown in the diagram.
  3. State one modelling assumption that you have made in your solution.
AQA M2 2008 June Q8
16 marks Standard +0.3
8
  1. Hooke's law states that the tension in a stretched string of natural length \(l\) and modulus of elasticity \(\lambda\) is \(\frac { \lambda x } { l }\) when its extension is \(x\). Using this formula, prove that the work done in stretching a string from an unstretched position to a position in which its extension is \(e\) is \(\frac { \lambda e ^ { 2 } } { 2 l }\).
    (3 marks)
  2. A particle, of mass 5 kg , is attached to one end of a light elastic string of natural length 0.6 metres and modulus of elasticity 150 N . The other end of the string is fixed to a point \(O\).
    1. Find the extension of the elastic string when the particle hangs in equilibrium directly below \(O\).
    2. The particle is pulled down and held at the point \(P\), which is 0.9 metres vertically below \(O\). Show that the elastic potential energy of the string when the particle is in this position is 11.25 J .
    3. The particle is released from rest at the point \(P\). In the subsequent motion, the particle has speed \(v \mathrm {~m} \mathrm {~s} ^ { - 1 }\) when it is \(x\) metres above \(\boldsymbol { P }\). Show that, while the string is taut, $$v ^ { 2 } = 10.4 x - 50 x ^ { 2 }$$
    4. Find the value of \(x\) when the particle comes to rest for the first time after being released, given that the string is still taut.
AQA M2 2009 June Q1
9 marks Moderate -0.5
1 A particle moves under the action of a force, \(\mathbf { F }\) newtons. At time \(t\) seconds, the velocity, \(\mathbf { v } \mathrm { m } \mathrm { s } ^ { - 1 }\), of the particle is given by $$\mathbf { v } = \left( t ^ { 3 } - 15 t - 5 \right) \mathbf { i } + \left( 6 t - t ^ { 2 } \right) \mathbf { j }$$
  1. Find an expression for the acceleration of the particle at time \(t\).
  2. The mass of the particle is 4 kg .
    1. Show that, at time \(t\), $$\mathbf { F } = \left( 12 t ^ { 2 } - 60 \right) \mathbf { i } + ( 24 - 8 t ) \mathbf { j }$$
    2. Find the magnitude of \(\mathbf { F }\) when \(t = 2\).
AQA M2 2009 June Q2
9 marks Moderate -0.8
2 A slide at a water park may be modelled as a smooth plane of length 20 metres inclined at \(30 ^ { \circ }\) to the vertical. Anne, who has a mass of 55 kg , slides down the slide. At the top of the slide, she has an initial velocity of \(3 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) down the slide.
  1. Calculate Anne's initial kinetic energy.
  2. By using conservation of energy, find the kinetic energy and the speed of Anne after she has travelled the 20 metres.
  3. State one modelling assumption which you have made.
AQA M2 2009 June Q3
9 marks Standard +0.3
3 A uniform ladder, of length 6 metres and mass 22 kg , rests with its foot, \(A\), on a rough horizontal floor and its top, \(B\), leaning against a smooth vertical wall. The vertical plane containing the ladder is perpendicular to the wall, and the angle between the ladder and the floor is \(\theta\). A man, of mass 90 kg , is standing at point \(C\) on the ladder so that the distance \(A C\) is 5 metres. With the man in this position, the ladder is on the point of slipping. The coefficient of friction between the ladder and the horizontal floor is 0.6 . The man may be modelled as a particle at \(C\). \includegraphics[max width=\textwidth, alt={}, center]{9cfa110c-ee11-447a-b21a-3f436432e27d-3_707_702_742_646}
  1. Show that the magnitude of the frictional force between the ladder and the horizontal floor is 659 N , correct to three significant figures.
  2. Find the angle \(\theta\).
AQA M2 2009 June Q4
8 marks Standard +0.3
4 Two light inextensible strings each have one end attached to a particle, \(P\), of mass 6 kg . The other ends of the strings are attached to the fixed points \(B\) and \(C\). The point \(C\) is vertically above the point \(B\). The particle moves, at constant speed, in a horizontal circle, with centre 0.6 m below point \(B\), with the strings inclined at \(40 ^ { \circ }\) and \(60 ^ { \circ }\) to the vertical, as shown in the diagram. Both strings are taut. \includegraphics[max width=\textwidth, alt={}, center]{9cfa110c-ee11-447a-b21a-3f436432e27d-4_761_542_539_751}
  1. As the particle moves in the horizontal circle, the tensions in the two strings are equal. Show that the tension in the strings is 46.4 N , correct to three significant figures.
  2. Find the speed of the particle.
AQA M2 2009 June Q5
6 marks Moderate -0.8
5 A train, of mass 600 tonnes, travels at constant speed up a slope inclined at an angle \(\theta\) to the horizontal, where \(\sin \theta = \frac { 1 } { 40 }\). The speed of the train is \(24 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) and it experiences total resistance forces of 200000 N . Find the power produced by the train, giving your answer in kilowatts.
AQA M2 2009 June Q6
12 marks Standard +0.3
6 A block, of mass 5 kg , is attached to one end of a length of elastic string. The other end of the string is fixed to a vertical wall. The block is placed on a horizontal surface. The elastic string has natural length 1.2 m and modulus of elasticity 180 N . The block is pulled so that it is 2 m from the wall and is then released from rest. Whilst taut, the string remains horizontal. It may be assumed that, after the string becomes slack, it does not interfere with the movement of the block. \includegraphics[max width=\textwidth, alt={}, center]{9cfa110c-ee11-447a-b21a-3f436432e27d-5_396_960_660_534}
  1. Calculate the elastic potential energy when the block is 2 m from the wall.
  2. If the horizontal surface is smooth, find the speed of the block when it hits the wall.
  3. The surface is in fact rough and the coefficient of friction between the block and the surface is \(\mu\). Find \(\mu\) if the block comes to rest just as it reaches the wall.
AQA M2 2009 June Q7
10 marks Standard +0.3
7 In crazy golf, a golf ball is hit so that it starts to move in a vertical circle on the inside of a smooth cylinder. Model the golf ball as a particle, \(P\), of mass \(m\). The circular path of the golf ball has radius \(a\) and centre \(O\). At time \(t\), the angle between \(O P\) and the horizontal is \(\theta\), as shown in the diagram. The golf ball has speed \(u\) at the lowest point of its circular path. \includegraphics[max width=\textwidth, alt={}, center]{9cfa110c-ee11-447a-b21a-3f436432e27d-6_739_742_719_641}
  1. Show that, while the golf ball is in contact with the cylinder, the reaction of the cylinder on the golf ball is $$\frac { m u ^ { 2 } } { a } - 3 m g \sin \theta - 2 m g$$
  2. Given that \(u = \sqrt { 3 a g }\), the golf ball will not complete a vertical circle inside the cylinder. Find the angle which \(O P\) makes with the horizontal when the golf ball leaves the surface of the cylinder.
    (4 marks)
AQA M2 2009 June Q8
12 marks Standard +0.3
8 A stone, of mass \(m\), is moving in a straight line along smooth horizontal ground.
At time \(t\), the stone has speed \(v\). As the stone moves, it experiences a total resistance force of magnitude \(\lambda m v ^ { \frac { 3 } { 2 } }\), where \(\lambda\) is a constant. No other horizontal force acts on the stone.
  1. Show that $$\frac { \mathrm { d } v } { \mathrm {~d} t } = - \lambda v ^ { \frac { 3 } { 2 } }$$ (2 marks)
  2. The initial speed of the stone is \(9 \mathrm {~m} \mathrm {~s} ^ { - 1 }\). Show that $$v = \frac { 36 } { ( 2 + 3 \lambda t ) ^ { 2 } }$$ (7 marks)
  3. Find, in terms of \(\lambda\), the time taken for the speed of the stone to drop to \(4 \mathrm {~ms} ^ { - 1 }\).
AQA M3 2009 June Q1
5 marks Standard +0.3
1 A ball of mass \(m\) is travelling vertically downwards with speed \(u\) when it hits a horizontal floor. The ball bounces vertically upwards to a height \(h\). It is thought that \(h\) depends on \(m , u\), the acceleration due to gravity \(g\), and a dimensionless constant \(k\), such that $$h = k m ^ { \alpha } u ^ { \beta } g ^ { \gamma }$$ where \(\alpha , \beta\) and \(\gamma\) are constants.
By using dimensional analysis, find the values of \(\alpha , \beta\) and \(\gamma\).
AQA M3 2009 June Q2
10 marks Standard +0.3
2 A particle is projected from a point \(O\) on a horizontal plane and has initial velocity components of \(2 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) and \(10 \mathrm {~ms} ^ { - 1 }\) parallel to and perpendicular to the plane respectively. At time \(t\) seconds after projection, the horizontal and upward vertical distances of the particle from the point \(O\) are \(x\) metres and \(y\) metres respectively.
  1. Show that \(x\) and \(y\) satisfy the equation $$y = - \frac { g } { 8 } x ^ { 2 } + 5 x$$
  2. By using the equation in part (a), find the horizontal distance travelled by the particle whilst it is more than 1 metre above the plane.
  3. Hence find the time for which the particle is more than 1 metre above the plane.
AQA M3 2009 June Q3
14 marks Standard +0.8
3 A fishing boat is travelling between two ports, \(A\) and \(B\), on the shore of a lake. The bearing of \(B\) from \(A\) is \(130 ^ { \circ }\). The fishing boat leaves \(A\) and travels directly towards \(B\) with speed \(2 \mathrm {~m} \mathrm {~s} ^ { - 1 }\). A patrol boat on the lake is travelling with speed \(4 \mathrm {~ms} ^ { - 1 }\) on a bearing of \(040 ^ { \circ }\). \includegraphics[max width=\textwidth, alt={}, center]{719b82f7-2ab5-48db-9b2a-98284096a78a-3_713_1319_443_406}
  1. Find the velocity of the fishing boat relative to the patrol boat, giving your answer as a speed together with a bearing.
  2. When the patrol boat is 1500 m due west of the fishing boat, it changes direction in order to intercept the fishing boat in the shortest possible time.
    1. Find the bearing on which the patrol boat should travel in order to intercept the fishing boat.
    2. Given that the patrol boat intercepts the fishing boat before it reaches \(B\), find the time, in seconds, that it takes the patrol boat to intercept the fishing boat after changing direction.
    3. State a modelling assumption necessary for answering this question, other than the boats being particles.
AQA M3 2009 June Q4
10 marks Standard +0.3
4 A particle of mass 0.5 kg is initially at rest. The particle then moves in a straight line under the action of a single force. This force acts in a constant direction and has magnitude \(\left( t ^ { 3 } + t \right) \mathrm { N }\), where \(t\) is the time, in seconds, for which the force has been acting.
  1. Find the magnitude of the impulse exerted by the force on the particle between the times \(t = 0\) and \(t = 4\).
  2. Hence find the speed of the particle when \(t = 4\).
  3. Find the time taken for the particle to reach a speed of \(12 \mathrm {~ms} ^ { - 1 }\).
AQA M3 2009 June Q5
12 marks Challenging +1.2
5 Two smooth spheres, \(A\) and \(B\), of equal radii and different masses are moving on a smooth horizontal surface when they collide. Just before the collision, \(A\) is moving with speed \(5 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) at an angle of \(30 ^ { \circ }\) to the line of centres of the spheres, and \(B\) is moving with speed \(3 \mathrm {~ms} ^ { - 1 }\) perpendicular to the line of centres, as shown in the diagram below. \begin{figure}[h]
\includegraphics[alt={},max width=\textwidth]{719b82f7-2ab5-48db-9b2a-98284096a78a-4_314_1100_593_392} \captionsetup{labelformat=empty} \caption{Before collision}
\end{figure} Immediately after the collision, \(A\) and \(B\) move with speeds \(u\) and \(v\) in directions which make angles of \(90 ^ { \circ }\) and \(40 ^ { \circ }\) respectively with the line of centres, as shown in the diagram below. \includegraphics[max width=\textwidth, alt={}, center]{719b82f7-2ab5-48db-9b2a-98284096a78a-4_392_1102_1155_392}
  1. Show that \(v = 4.67 \mathrm {~m} \mathrm {~s} ^ { - 1 }\), correct to three significant figures.
  2. Find the coefficient of restitution between the spheres.
  3. Given that the mass of \(A\) is 0.5 kg , show that the magnitude of the impulse exerted on \(A\) during the collision is 2.17 Ns , correct to three significant figures.
  4. Find the mass of \(B\).
AQA M3 2009 June Q6
13 marks Standard +0.3
6 A smooth sphere \(A\) of mass \(m\) is moving with speed \(5 u\) in a straight line on a smooth horizontal table. The sphere \(A\) collides directly with a smooth sphere \(B\) of mass \(7 m\), having the same radius as \(A\) and moving with speed \(u\) in the same direction as \(A\). The coefficient of restitution between \(A\) and \(B\) is \(e\). \includegraphics[max width=\textwidth, alt={}, center]{719b82f7-2ab5-48db-9b2a-98284096a78a-5_287_880_529_571}
  1. Show that the speed of \(B\) after the collision is \(\frac { u } { 2 } ( e + 3 )\).
  2. Given that the direction of motion of \(A\) is reversed by the collision, show that \(e > \frac { 3 } { 7 }\).
  3. Subsequently, \(B\) hits a wall fixed at right angles to the direction of motion of \(A\) and \(B\). The coefficient of restitution between \(B\) and the wall is \(\frac { 1 } { 2 }\). Given that after \(B\) rebounds from the wall both spheres move in the same direction and collide again, show also that \(e < \frac { 9 } { 13 }\).
    (4 marks)
AQA M3 2009 June Q7
11 marks Challenging +1.2
7 A particle is projected from a point \(O\) on a smooth plane which is inclined at \(30 ^ { \circ }\) to the horizontal. The particle is projected down the plane with velocity \(10 \mathrm {~m} \mathrm {~s} ^ { - 1 }\) at an angle of \(40 ^ { \circ }\) above the plane and first strikes it at a point \(A\). The motion of the particle is in a vertical plane containing a line of greatest slope of the inclined plane. \includegraphics[max width=\textwidth, alt={}, center]{719b82f7-2ab5-48db-9b2a-98284096a78a-6_449_963_488_529}
  1. Show that the time taken by the particle to travel from \(O\) to \(A\) is $$\frac { 20 \sin 40 ^ { \circ } } { g \cos 30 ^ { \circ } }$$
  2. Find the components of the velocity of the particle parallel to and perpendicular to the slope as it hits the slope at \(A\).
  3. The coefficient of restitution between the slope and the particle is 0.5 . Find the speed of the particle as it rebounds from the slope.
AQA FP1 2005 January Q1
7 marks Standard +0.3
1 The equation $$x ^ { 2 } - 5 x - 2 = 0$$ has roots \(\alpha\) and \(\beta\).
  1. Write down the values of \(\alpha + \beta\) and \(\alpha \beta\).
  2. Find the value of \(\alpha ^ { 2 } \beta + \alpha \beta ^ { 2 }\).
  3. Find a quadratic equation which has roots $$\alpha ^ { 2 } \beta \quad \text { and } \quad \alpha \beta ^ { 2 }$$
AQA FP1 2005 January Q2
8 marks Moderate -0.5
2 A curve has equation $$\frac { x ^ { 2 } } { 9 } + \frac { y ^ { 2 } } { 4 } = 1$$
  1. Sketch the curve, showing the coordinates of the points of intersection with the coordinate axes.
  2. Calculate the \(y\)-coordinates of the points of intersection of the curve with the line \(x = 1\). Give your answers in the form \(p \sqrt { 2 }\), where \(p\) is a rational number.
  3. The curve is translated one unit in the positive \(x\) direction. Write down the equation of the curve after the translation.