Particle on rough incline, particle hanging

7 \includegraphics[max width=\textwidth, alt={}, center]{99f20949-471d-4da3-a680-ec24abf6baa5-10_335_937_255_605} Particles \(A\) and \(B\), of masses 2.4 kg and 3.3 kg respectively, are connected by a light inextensible string that passes over a smooth pulley which is fixed to the top of a rough plane. The plane makes an angle of \(\theta ^ { \circ }\) with horizontal ground. Particle \(A\) is on the plane and the section of the string between \(A\) and the pulley is parallel to a line of greatest slope of the plane. Particle \(B\) hangs vertically below the pulley and is 1 m above the ground (see diagram). The coefficient of friction between the plane and \(A\) is \(\mu\).

1. It is given that \(\theta = 30\) and the system is in equilibrium with \(A\) on the point of moving directly up the plane. Show that \(\mu = 1.01\) correct to 3 significant figures.
2. It is given instead that \(\theta = 20\) and \(\mu = 1.01\). The system is released from rest with the string taut. Find the total distance travelled by \(A\) before coming to instantaneous rest. You may assume that \(A\) does not reach the pulley and that \(B\) remains at rest after it hits the ground.
   If you use the following lined page to complete the answer(s) to any question(s), the question number(s) must be clearly shown.

5 \includegraphics[max width=\textwidth, alt={}, center]{099c81e0-a95a-4f98-801c-32d905ef7c7d-3_432_710_258_721} Two particles of masses 5 kg and 10 kg are connected by a light inextensible string that passes over a fixed smooth pulley. The 5 kg particle is on a rough fixed slope which is at an angle of \(\alpha\) to the horizontal, where \(\tan \alpha = \frac { 3 } { 4 }\). The 10 kg particle hangs below the pulley (see diagram). The coefficient of friction between the slope and the 5 kg particle is \(\frac { 1 } { 2 }\). The particles are released from rest. Find the acceleration of the particles and the tension in the string.

7. \begin{figure}[h] \end{figure} Two particles \(A\) and \(B\), of mass 7 kg and 3 kg respectively, are attached to the ends of a light inextensible string. Initially \(B\) is held at rest on a rough fixed plane inclined at angle \(\theta\) to the horizontal, where \(\tan \theta = \frac { 5 } { 12 }\). The part of the string from \(B\) to \(P\) is parallel to a line of greatest slope of the plane. The string passes over a small smooth pulley, \(P\), fixed at the top of the plane. The particle \(A\) hangs freely below \(P\), as shown in Figure 4. The coefficient of friction between \(B\) and the plane is \(\frac { 2 } { 3 }\). The particles are released from rest with the string taut and \(B\) moves up the plane.

1. Find the magnitude of the acceleration of \(B\) immediately after release.
2. Find the speed of \(B\) when it has moved 1 m up the plane. When \(B\) has moved 1 m up the plane the string breaks. Given that in the subsequent motion \(B\) does not reach \(P\),
3. find the time between the instants when the string breaks and when \(B\) comes to instantaneous rest.

8. \begin{figure}[h] \end{figure} Two particles \(P\) and \(Q\) have mass 4 kg and 0.5 kg respectively. The particles are attached to the ends of a light inextensible string. Particle \(P\) is held at rest on a fixed rough plane, which is inclined to the horizontal at an angle \(\alpha\) where \(\tan \alpha = \frac { 4 } { 3 }\). The coefficient of friction between \(P\) and the plane is 0.5 . The string lies along the plane and passes over a small smooth light pulley which is fixed at the top of the plane. Particle \(Q\) hangs freely at rest vertically below the pulley. The string lies in the vertical plane which contains the pulley and a line of greatest slope of the inclined plane, as shown in Figure 4. Particle \(P\) is released from rest with the string taut and slides down the plane. Given that \(Q\) has not hit the pulley, find

1. the tension in the string during the motion,
2. the magnitude of the resultant force exerted by the string on the pulley.

7. \begin{figure}[h] \end{figure} A particle \(P\) of mass \(4 m\) is held at rest at the point \(X\) on the surface of a rough inclined plane which is fixed to horizontal ground. The point \(X\) is a distance \(h\) from the bottom of the inclined plane. The plane is inclined to the horizontal at an angle \(\alpha\) where \(\tan \alpha = \frac { 3 } { 4 }\). The coefficient of friction between \(P\) and the plane is \(\frac { 1 } { 4 }\). The particle \(P\) is attached to one end of a light inextensible string. The string passes over a small smooth pulley which is fixed at the top of the plane. The other end of the string is attached to a particle \(Q\) of mass \(m\) which hangs freely at a distance \(d\), where \(d > h\), below the pulley, as shown in Figure 4. The string lies in a vertical plane through a line of greatest slope of the inclined plane. The system is released from rest with the string taut and \(P\) moves down the plane. For the motion of the particles before \(P\) hits the ground,

1. state which of the information given above implies that the magnitudes of the accelerations of the two particles are the same,
2. write down an equation of motion for each particle,
3. find the acceleration of each particle. When \(P\) hits the ground, it immediately comes to rest. Given that \(Q\) comes to instantaneous rest before reaching the pulley,
4. show that \(d > \frac { 28 h } { 25 }\).
   \includegraphics[max width=\textwidth, alt={}, center]{4fd21e83-0bdf-4bb1-8a3f-76beada511ae-27_56_20_109_1950}
   

   END

8. \begin{figure}[h] \end{figure} Two particles, \(A\) and \(B\), have masses 2 kg and 4 kg respectively. The particles are connected by a light inextensible string. The string passes over a small smooth pulley which is fixed at the top of a rough plane. The plane is inclined to the horizontal ground at an angle \(\alpha\) where \(\tan \alpha = \frac { 3 } { 4 }\). The particle \(A\) is held at rest on the plane at a distance \(d\) metres from the pulley. The particle \(B\) hangs freely at rest, vertically below the pulley, at a distance \(h\) metres above the ground, as shown in Figure 3. The part of the string between \(A\) and the pulley is parallel to a line of greatest slope of the plane. The coefficient of friction between \(A\) and the plane is \(\frac { 1 } { 4 }\) The system is released from rest with the string taut and \(B\) descends.

1. Find the tension in the string as \(B\) descends. On hitting the ground, \(B\) immediately comes to rest. Given that \(A\) comes to rest before reaching the pulley,
2. find, in terms of \(h\), the range of possible values of \(d\).
3. State one physical factor, other than air resistance, that could be taken into account to make the model described above more realistic.

8. \begin{figure}[h] \end{figure} One end of a light inextensible string is attached to a particle \(A\) of mass \(2 m\). The other end of the string is attached to a particle \(B\) of mass \(3 m\). Particle \(A\) is held at rest on a rough plane which is inclined to horizontal ground at an angle \(\alpha\), where \(\tan \alpha = \frac { 5 } { 12 }\) The string passes over a small smooth pulley \(P\) which is fixed at the top of the plane. Particle \(B\) hangs vertically below \(P\) with the string taut, at a height \(h\) above the ground, as shown in Figure 4. The part of the string between \(A\) and \(P\) lies along a line of greatest slope of the plane. The two particles, the string and the pulley all lie in the same vertical plane.
The coefficient of friction between \(A\) and the plane is \(\frac { 11 } { 36 }\) The particle \(A\) is released from rest and begins to move up the plane.

1. Show that the frictional force acting on \(A\) as it moves up the plane is \(\frac { 22 m g } { 39 }\)
2. Write down an equation of motion for \(B\).
3. Show that the acceleration of \(A\) immediately after its release is \(\frac { 1 } { 3 } g\) In the subsequent motion, \(A\) comes to rest before it reaches the pulley.
4. Find, in terms of \(h\), the total distance travelled by \(A\) from when it was released from rest to when it first comes to rest again.

   VJYV SIHI NI JIIIM ION OC

   vauv sthin NI BLIYM ION OC

   V34V SIHI NI IIIIMM ION OC

   VJYV SIHI NI JIIIM ION OC

   vauv sthin NI BLIYM ION OO

   V34V SIHI NI IIIIMM ION OC

8. \begin{figure}[h] \end{figure} Two particles \(P\) and \(Q\) have masses 2 kg and 3 kg respectively. The particles are attached to the ends of a light inextensible string. The string passes over a smooth light pulley which is fixed at the top of a rough plane. The plane is inclined to horizontal ground at an angle \(\alpha\), where tan \(\alpha = \frac { 3 } { 4 }\). Initially \(P\) is held at rest on the inclined plane with the part of the string from \(P\) to the pulley parallel to a line of greatest slope of the plane. The particle \(Q\) hangs freely below the pulley at a height of 0.5 m above the ground, as shown in Figure 3. The coefficient of friction between \(P\) and the plane is \(\mu\). The system is released from rest, with the string taut, and \(Q\) strikes the ground before \(P\) reaches the pulley. The speed of \(Q\) at the instant when it strikes the ground is \(1.4 \mathrm {~m} \mathrm {~s} ^ { - 1 }\).

1. For the motion before \(Q\) strikes the ground, find the tension in the string.
2. Find the value of \(\mu\).

   END

7. \begin{figure}[h] \end{figure} One end of a light inextensible string is attached to a particle \(A\) of mass \(2 m\). The other end of the string is attached to a particle \(B\) of mass \(3 m\). The string passes over a small, smooth, light pulley \(P\) which is fixed at the top of a rough inclined plane. The plane is inclined to the horizontal at an angle \(\alpha\), where \(\tan \alpha = \frac { 3 } { 4 }\) Particle \(A\) is held at rest on the plane with the string taut and \(B\) hanging freely below \(P\), as shown in Figure 4. The section of the string \(A P\) is parallel to a line of greatest slope of the plane. The coefficient of friction between \(A\) and the plane is \(\frac { 1 } { 2 }\) Particle \(A\) is released and begins to move up the plane.
For the motion before \(A\) reaches the pulley,

1. 1. write down an equation of motion for \(A\),
   2. write down an equation of motion for \(B\),
2. find, in terms of \(g\), the acceleration of \(A\),
3. find the magnitude of the force exerted on the pulley by the string.
4. State how you have used the information that \(P\) is a smooth pulley.

2. \begin{figure}[h] \end{figure} A small stone \(A\) of mass \(3 m\) is attached to one end of a string.
A small stone \(B\) of mass \(m\) is attached to the other end of the string.
Initially \(A\) is held at rest on a fixed rough plane.
The plane is inclined to the horizontal at an angle \(\alpha\), where \(\tan \alpha = \frac { 3 } { 4 }\) The string passes over a pulley \(P\) that is fixed at the top of the plane.
The part of the string from \(A\) to \(P\) is parallel to a line of greatest slope of the plane.
Stone \(B\) hangs freely below \(P\), as shown in Figure 1.
The coefficient of friction between \(A\) and the plane is \(\frac { 1 } { 6 }\) Stone \(A\) is released from rest and begins to move down the plane.
The stones are modelled as particles.
The pulley is modelled as being small and smooth.
The string is modelled as being light and inextensible. Using the model for the motion of the system before \(B\) reaches the pulley,

1. write down an equation of motion for \(A\)
2. show that the acceleration of \(A\) is \(\frac { 1 } { 10 } \mathrm {~g}\)
3. sketch a velocity-time graph for the motion of \(B\), from the instant when \(A\) is released from rest to the instant just before \(B\) reaches the pulley, explaining your answer. In reality, the string is not light.
4. State how this would affect the working in part (b).

13 A block of mass 8 kg is placed on a rough plane inclined at \(15 ^ { \circ }\) to the horizontal. The coefficient of friction between the block and the plane is 0.3 . One end of a light rope is attached to the block. The rope passes over a smooth pulley fixed at the top of the plane, and a sphere of mass 5 kg , attached to the other end of the rope, hangs vertically below the pulley. The part of the rope between the block and the pulley is parallel to the plane. The system is released from rest, and as the sphere falls the block moves directly up the plane with acceleration \(a \mathrm {~ms} ^ { - 2 }\). \includegraphics[max width=\textwidth, alt={}, center]{8eeff88d-8b05-43c6-86a5-bd82221c0bea-08_252_803_1560_246}

1. On the diagram in the Printed Answer Booklet, show all the forces acting on the block and on the sphere.
2. Write down the equation of motion for the sphere.
3. Determine the value of \(a\).

\includegraphics{figure_7} A rough inclined plane of length 65 cm is fixed with one end at a height of 16 cm above the other end. Particles \(P\) and \(Q\), of masses \(0.13\) kg and \(0.11\) kg respectively, are attached to the ends of a light inextensible string which passes over a small smooth pulley at the top of the plane. Particle \(P\) is held at rest on the plane and particle \(Q\) hangs vertically below the pulley (see diagram). The system is released from rest and \(P\) starts to move up the plane.

1. Draw a diagram showing the forces acting on \(P\) during its motion up the plane. [1]
2. Show that \(T - F > 0.32\), where \(T\) N is the tension in the string and \(F\) N is the magnitude of the frictional force on \(P\). [4]

The coefficient of friction between \(P\) and the plane is 0.6.

1. Find the acceleration of \(P\). [6]

\includegraphics{figure_5} Figure 5 shows two particles \(A\) and \(B\), of mass \(2m\) and \(4m\) respectively, connected by a light inextensible string. Initially \(A\) is held at rest on a rough inclined plane which is fixed to horizontal ground. The plane is inclined to the horizontal at an angle \(\alpha\), where \(\tan\alpha = \frac{3}{4}\). The coefficient of friction between \(A\) and the plane is \(\frac{1}{4}\). The string passes over a small smooth pulley \(P\) which is fixed at the top of the plane. The part of the string from \(A\) to \(P\) is parallel to a line of greatest slope of the plane and \(B\) hangs vertically below \(P\). The system is released from rest with the string taut, with \(A\) at the point \(X\) and with \(B\) at a height \(h\) above the ground. For the motion until \(B\) hits the ground,

1. give a reason why the magnitudes of the accelerations of the two particles are the same, [1]
2. write down an equation of motion for each particle, [4]
3. find the acceleration of each particle. [5]

Particle \(B\) does not rebound when it hits the ground and \(A\) continues moving up the plane towards \(P\). Given that \(A\) comes to rest at the point \(Y\), without reaching \(P\),

1. find the distance \(XY\) in terms of \(h\). [6]

\includegraphics{figure_2} Two particles \(P\) and \(Q\) have masses 0.3 kg and \(m\) kg respectively. The particles are attached to the ends of a light inextensible string. The string passes over a small smooth pulley which is fixed at the top of a fixed rough plane. The plane is inclined to the horizontal at an angle \(\alpha\), where \(\tan \alpha = \frac{3}{4}\). The coefficient of friction between \(P\) and the plane is \(\frac{1}{2}\). The string lies in a vertical plane through a line of greatest slope of the inclined plane. The particle \(P\) is held at rest on the inclined plane and the particle \(Q\) hangs freely below the pulley with the string taut, as shown in Figure 2. The system is released from rest and \(Q\) accelerates vertically downwards at 1.4 m s\(^{-2}\). Find

1. the magnitude of the normal reaction of the inclined plane on \(P\), [2]
2. the value of \(m\). [8]

When the particles have been moving for 0.5 s, the string breaks. Assuming that \(P\) does not reach the pulley,

1. find the further time that elapses until \(P\) comes to instantaneous rest. [6]

\includegraphics{figure_2} A fixed rough plane is inclined at 30° to the horizontal. A small smooth pulley \(P\) is fixed at the top of the plane. Two particles \(A\) and \(B\), of mass 2 kg and 4 kg respectively, are attached to the ends of a light inextensible string which passes over the pulley \(P\). The part of the string from \(A\) to \(P\) is parallel to a line of greatest slope of the plane and \(B\) hangs freely below \(P\), as shown in Figure 2. The coefficient of friction between \(A\) and the plane is \(\frac{1}{\sqrt{3}}\). Initially \(A\) is held at rest on the plane. The particles are released from rest with the string taut and \(A\) moves up the plane. Find the tension in the string immediately after the particles are released. [9]

Two heavy boxes, \(M\) and \(N\), are connected securely by a length of rope. The mass of \(M\) is 50 kilograms. The mass of \(N\) is 80 kilograms. \(M\) is placed near the bottom of a rough slope. The slope is inclined at 60° above the horizontal. The rope is passed over a smooth pulley at the top end of the slope so that \(N\) hangs with the rope vertical. The boxes are initially held in this position, with the rope taut and running parallel to the line of greatest slope, as shown in the diagram below. \includegraphics{figure_21} When the boxes are released, \(M\) moves up the slope as \(N\) descends, with acceleration \(a\) m s\(^{-2}\) The tension in the rope is \(T\) newtons.

1. Explain why the equation of motion for \(N\) is $$80g - T = 80a$$ [1 mark]
2. Show that the normal reaction force between \(M\) and the slope is \(25g\) newtons. [1 mark]
3. The coefficient of friction, \(\mu\), between the slope and \(M\) is such that \(0 \leq \mu \leq 1\) Show that $$a \geq \frac{(11 - 5\sqrt{3})g}{26}$$ [6 marks]
4. State one modelling assumption you have made throughout this question. [1 mark]

\includegraphics{figure_11} The diagram shows a particle, \(A\), of mass \(m_1\) at rest on a rough slope at an angle \(\theta\) to the horizontal, where \(\sin \theta = \frac{3}{5}\). Particle \(A\) is connected by a light inextensible string to another particle, \(B\), of mass \(m_2\). The string passes over a smooth peg at the top of the slope and particle \(B\) is hanging freely.

1. In the case when \(m_2 = \frac{1}{4}m_1\), particle \(A\) is on the point of sliding down the slope.
   1. Draw a fully labelled diagram to show all the forces acting on the particles. [2]
   2. Find the coefficient of friction between \(A\) and the slope. [6]
2. In the case when \(m_2 = m_1\), find the acceleration of the particles. [4]