Open box from cut-corner sheet

7. \begin{figure}[h] \end{figure} Figure 1 shows a rectangular sheet of metal of negligible thickness, which measures 25 cm by 15 cm . Squares of side \(x \mathrm {~cm}\) are cut from each corner of the sheet and the remainder is folded along the dotted lines to make an open cuboid box, as shown in Figure 2.

1. Show that the volume, \(V \mathrm {~cm} ^ { 3 }\), of the box is given by $$V = 4 x ^ { 3 } - 80 x ^ { 2 } + 375 x$$
2. Use calculus to find the value of \(x\), to 3 significant figures, for which the volume of the box is a maximum.
3. Justify that this value of \(x\) gives a maximum value for \(V\).
4. Find, to 3 significant figures, the maximum volume of the box.
   \section*{8.} \begin{figure}[h]
   \includegraphics[alt={},max width=\textwidth]{6f9ace43-747b-419f-a9d1-d30165d77379-22_670_1004_292_392} \captionsetup{labelformat=empty} \caption{Figure 3}
   \end{figure} Figure 3 shows a sketch of the curve with equation \(y = \mathrm { f } ( x ) , x \in \mathbb { R }\). The curve crosses the \(y\)-axis at the point \(( 0,5 )\) and crosses the \(x\)-axis at the point \(( 6,0 )\). The curve has a minimum point at \(( 1,3 )\) and a maximum point at \(( 4,7 )\). On separate diagrams, sketch the curve with equation

6 The diagram below shows a rectangular sheet of metal 24 cm by 9 cm . \includegraphics[max width=\textwidth, alt={}, center]{10bca9b4-5327-4b35-8b75-612b396e8a76-4_512_897_386_561} A square of side \(x \mathrm {~cm}\) is cut from each corner and the metal is then folded along the broken lines to make an open box with a rectangular base and height \(x \mathrm {~cm}\).

1. Show that the volume, \(V \mathrm {~cm} ^ { 3 }\), of liquid the box can hold is given by $$V = 4 x ^ { 3 } - 66 x ^ { 2 } + 216 x$$
2. 1. Find \(\frac { \mathrm { d } V } { \mathrm {~d} x }\).
   2. Show that any stationary values of \(V\) must occur when \(x ^ { 2 } - 11 x + 18 = 0\).
   3. Solve the equation \(x ^ { 2 } - 11 x + 18 = 0\).
   4. Explain why there is only one value of \(x\) for which \(V\) is stationary.
3. 1. Find \(\frac { \mathrm { d } ^ { 2 } V } { \mathrm {~d} x ^ { 2 } }\).
   2. Hence determine whether the stationary value is a maximum or minimum.

10 A square sheet of metal has edges 30 cm long. Four squares each with edge \(x \mathrm {~cm}\), where \(x < 15\), are removed from the corners of the sheet. The four rectangular sections are bent upwards to form an open-topped box, as shown in the diagrams. \includegraphics[max width=\textwidth, alt={}, center]{f87d1b36-26db-4a0b-b9ec-d7d82a396aba-12_392_460_630_347} \includegraphics[max width=\textwidth, alt={}, center]{f87d1b36-26db-4a0b-b9ec-d7d82a396aba-12_387_437_635_872} \includegraphics[max width=\textwidth, alt={}, center]{f87d1b36-26db-4a0b-b9ec-d7d82a396aba-12_282_380_703_1318} 10

1. Show that the capacity, \(C \mathrm {~cm} ^ { 3 }\), of the box is given by $$C = 900 x - 120 x ^ { 2 } + 4 x ^ { 3 }$$ 10
2. Find the maximum capacity of the box. Fully justify your answer.

\includegraphics{figure_2} A rectangular sheet of metal measures 50 cm by 40 cm. Squares of side \(x\) cm are cut from each corner of the sheet and the remainder is folded along the dotted lines to make an open tray, as shown in Fig. 2.

1. Show that the volume, \(V\) cm\(^3\), of the tray is given by $$V = 4x(x^2 - 45x + 500)$$ [3]
2. State the range of possible values of \(x\). [1]
3. Find the value of \(x\) for which \(V\) is a maximum. [4]
4. Hence find the maximum value of \(V\). [2]
5. Justify that the value of \(V\) you found in part (d) is a maximum. [2]